@article { author = {Aalaee Bazkiaee, Pooya and Kamkar, Behnam and Amiri, Ebrahim and Kazemi, Hossein and Rezaei, Mojtaba}, title = {Estimating rice potential yield and fertilizer requirements in Guilan province using GIS and crop modeling}, journal = {Cereal Research}, volume = {12}, number = {1}, pages = {81-100}, year = {2022}, publisher = {University of Guilan}, issn = {2252-0163}, eissn = {2538-6115}, doi = {10.22124/cr.2023.21385.1707}, abstract = {IntroductionRational fertilizer management is crucial in the efficient use of resources that are basically non-renewable and that can have a great environmental impact when used without scientific basis. The availability of scientifically sound decision-making tools for rational fertilization  is scarce. FertiliCalc-Fertigate software is a program to determine the consumption of NPK fertilizers during the growing season in a cost-effective and sustainable way. Today, the geographic information system is widely used in spatial planning by determining the distribution of phenomena and combining maps and interpreting ecological data in different stages of planning. Also, the potential yield in an area can be estimated using field tests and simulation models. The ORYZA2000 model is one of the efficient models in investigating rice potential yield, which simulates the growth and development of rice plants under favorable conditions, water limitation and nitrogen limitation. In this study, an attempt was made to estimate the potential yield in Guilan province by integrating the ORYZA2000 model and geographic information system. Also, after determining the potential yield, the NPK fertilizer requirement estimated using FertiliCalc-Fertigate software.Materials and methodsThis research was conducted to investigate the potential yield of rice in Guilan province using the ORYZA2000 model. After calibrating and validating the model at the field test level, the model was used to evaluate the potential yield of rice in 12 synoptic stations of Guilan province. The processing of Landsat 8 satellite images was used to separate rice fields in Guilan province and the studied area was separated using supervised classification. The estimation of potential yield in Guilan province was done by combining GIS environment and ORYZA2000 model. The amount of radiation for the whole area was calculated from the Points Solar Radiation function in GIS. Then, from the relationship between the amount of radiation received during the rice growing season and the potential yield estimated in the ORYZA2000 model, the potential yield was calculated and generalized to the whole area based on the agricultural land use of Guilan province. Fertilizer requirement of lands was calculated using FertiliCalc-Fertigate 1.0 software. In order to evaluate  the fertilizer requirement at the province level, first, 320 points were randomly selected in the rice cultivation area of the province and the fertilizer requirement of each point was determined based on the required information, including potential yield and soil information. Then the points were interpolated and the study results were presented in the form of fertilizer requirement maps.Research findingsThe results showed that the amount of radiation in rice fields in the Guilan area, during the growing season, was between 2552 to 6259 MJ/m2 (average 4405 MJ/m2) in 2016 and from 2423 to 5337 MJ/m2 (average 3880 MJ/m2) in 2017. The lowest amount of received radiation was in the central areas of the basin, which can be due to the topographic conditions of the area. Using the regression relationship between radiation during the growing season and potential yield, a potential yield map of rice fields was prepared. Based on the results, potential yield in rice fields of Guilan province was between 4416 to 7038 kg/ha (with an average of 5160 kg/ha) in 2016 and between 4558 to 7180 kg/ha (with an average yield of 5302 kg/ha) in 2017. Based on these results, the combined approach of ORYZA2000 model and GIS has a good ability to simulate potential yield in the study area. Estimation the levels of fertilizer requirements in the rice fields of Gilan province showed that in order to achieve the potential yield, 262 to 274 kg/ha of potassium fertilizer, 116 to 171 kg/ha of nitrogen fertilizer, and 8 to 12 kg/ha of phosphorus fertilizer are needed. Based on the calculated fertilizer requirement, potassium has played the most important role in achieving the potential yield of rice in the province.ConclusionIt seems that in many areas of Gilan province, the application of NPK levels in an inappropriate amount and time causes a decrease in rice yield. The results of this research can recommend the appropriate fertilizer consumption pattern to farmers through rice experts so as to achieve maximum yield and avoid problems such as phosphorus leaching due to excessive consumption.}, keywords = {Food Security,ORYZA2000 model,Potential yield}, title_fa = {برآورد عملکرد پتانسیل برنج و نیاز کودی در استان گیلان با استفاده از سامانه اطلاعات جغرافیایی و مدل سازی گیاه زراعی}, abstract_fa = {مقدمه: مدیریت منطقی در استفاده بهینه از منابع کود که اساساً تجدیدناپذیر هستند و در صورت استفاده بدون پایه علمی می­توانند تأثیرات زیست­محیطی زیادی داشته باشند، بسیار مهم است. ابزارهای تصمیم­گیری علمی محدودی جهت کاربرد منابع کود وجود دارد. نرم­افزار FertiliCalc-Fertigate برنامه­ای جهت محاسبه میزان مصرف کودهای NPK در طول فصل رشد به­صورت مقرون به­صرفه و پایدار است. امروزه سامانه اطلاعات جغرافیایی در برنامه‌ریزی مکانی با تعیین پراکنش پدیده­ها و روی هم­گذاری نقشه‌ها و تفسیر داده‌های بوم‌شناختی، در مراحل مختلف برنامه­ریزی کاربرد گسترده­ای دارد. همچنین پتانسیل عملکرد در یک منطقه را می­توان با استفاده از آزمایش­های میدانی و مدل­های شبیه­سازی برآورد کرد. مدل ORYZA2000، یکی از مدل‌های کارآمد در بررسی پتانسیل عملکرد برنج است که رشد و نمو گیاه برنج را در شرایط مطلوب، محدودیت آبی و محدودیت نیتروژن شبیه‌سازی می‌کند. در این مطالعه سعی شد تا با تلفیق مدل ORYZA2000 و سامانه اطلاعات جغرافیایی (GIS)، عملکرد پتانسیل در سطح استان گیلان برآورد شود. همچنین پس از تعیین عملکرد پتانسیل، میزان نیاز کودهای NPK نیز با استفاده از نرم­افزار FertiliCalc-Fertigate برآورد شد.مواد و روش­ ها: این پژوهش به­منظور بررسی عملکرد پتانسیل برنج در سطح استان گیلان با استفاده از مدل ORYZA2000 صورت گرفت. پس از واسنجی و اعتبارسنجی مدل در سطح آزمایش مزرعه، از این مدل جهت ارزیابی عملکرد پتانسیل برنج در 12 ایستگاه­ همدیدی استان گیلان استفاده شد. از پردازش تصاویر ماهواره لندست 8 جهت تفکیک مزارع برنج استان گیلان استفاده و محدوده مورد مطالعه با استفاده از طبقه­بندی نظارت­شده جدا شد. برآورد عملکرد پتانسیل در سطح استان گیلان با تلفیق محیط GIS و مدل ORYZA2000 صورت گرفت. میزان تابش برای کل حوزه از تابعPoints Solar Radiation  در GIS محاسبه شد. سپس از رابطه بین مقدار تابش رسیده طی فصل رشد برنج و عملکرد پتانسیل برآورد شده در مدل ORYZA2000، عملکرد پتانسیل محاسبه و بر مبنای کاربری زراعی استان گیلان به کل سطح تعمیم داده شد. نیاز کودی زمین­ها با استفاده از نرم­افزار FertiliCalc-Fertigate 1.0 محاسبه شد. جهت بررسی نیاز کودی در سطح استان، ابتدا تعداد 320 نقطه در سطح محدوده کشت برنج استان به­صورت تصادفی انتخاب و در هر نقطه بر اساس اطلاعات مورد نیاز از جمله میزان عملکرد پتانسیل و اطلاعات خاک، نیاز کودی هر نقطه تعیین شد. سپس درون­یابی نقاط صورت گرفت و نتایج مطالعه به صورت نقشه­های نیاز کودی ارایه شد.یافته­ های تحقیق: نتایج این مطالعه نشان داد که میزان تابش مزارع برنج طی فصل رشد در منطقه گیلان از 2552 تا 6259 (به‌طور میانگین 4405 مگاژول بر مترمربع) در سال 1395 و از 2423 تا 5337 (به‌طور میانگین 3880 مگاژول بر مترمربع) در سال 1396 بود. کم­ترین میزان تابش دریافتی در مناطق مرکزی حوزه بود که دلیل آن می‌تواند شرایط توپوگرافی منطقه باشد. با استفاده از رابطه رگرسیونی بین تابش رسیده طی فصل رشد و میزان عملکرد پتانسیل، نقشه عملکرد پتانسیل مزارع برنج تهیه شد. بر اساس نتایج، عملکرد پتانسیل در مزارع برنج استان گیلان در سال 1395 بین 4416 تا 7038 کیلوگرم در هکتار (با میانگین 5160 کیلوگرم در هکتار) و در سال 1396 بین 4558 تا 7180 کیلوگرم در هکتار (با میانگین عملکرد 5302 کیلوگرم در هکتار) متغیر بود. نتایج این مطالعه نشان داد که رهیافت تلفیق مدل ORYZA2000 و GIS از توانایی مناسبی برای شبیه­سازی عملکرد پتانسیل در منطقه مورد مطالعه برخوردار است. بررسی سطوح نیاز کودی در زمین­های برنج استان گیلان نیز نشان داد که جهت دستیابی به عملکرد پتانسیل، مصرف 262 تا 274 کیلوگرم در هکتار کود پتاسیم، 116 تا 171 کیلوگرم در هکتار کود نیتروژن و 8 تا 12 کیلوگرم در هکتار کود فسفر نیاز است. همچنین، بر اساس نیازهای کودی محاسبه شده در این مطالعه، پتاسیم مهم­ترین نقش را جهت دستیابی به عملکرد پتانسیل برنج در سطح استان گیلان داشت.نتیجه ­گیری: به ­نظر می­رسد در بسیاری از مناطق استان گیلان، کاربرد کودهای NPK در مقدار و زمان نامناسب سبب کاهش عملکرد برنج می­شود. نتایج این تحقیق می­تواند الگوی مصرف مناسب کود را مشخص کند تا از طریق کارشناسان برنج به کشاورزان توصیه و ضمن دستیابی به حداکثر عملکرد برنج، از مشکلاتی چون آبشویی فسفر در اثر مصرف بیش از حد آن خودداری شود.}, keywords_fa = {امنیت غذایی,عملکرد پتانسیل,مدل ORYZA2000}, url = {https://cr.guilan.ac.ir/article_6138.html}, eprint = {https://cr.guilan.ac.ir/article_6138_9925a4747697b3cc7a5979de00c5617e.pdf} }